Death - Power Line
Death - No GFCI
Death - Missing Ground
Death - Misused Equipment
Death - Extension & Flexible Cords
Death - Portable Ladder
Death - Protruding Rebar
Death - Improper Scaffold
Death - Unprotected Sides
Death - Struck By
Death - Falling/Flying Objects
Death - Masonry Walls
Death - No Protective Systems
Death - No Trench Inspection
Death - Unsafe Spoil-Pile
Death - Unsafe Access / Egress
Some Highlights to
Online Training
-
Receive your 10 and/or
30 hour OSHA Card
-
Build your resume
-
Train where you want
& when you want
-
Take up to 6 months
to complete
-
It's OSHA recommended
for new employee's
-
Training records are
archived which is great
if you loose yours
-
Credit Cards Accepted
Safe Steps Training
is bringing Safety
to your World!
No mater where
that may be.
Safe Steps
Training, LLC
432 Loop Road, Cove City, North Carolina, 28523
(252) 474-4626 |
30 Hour OSHA Outreach
Program Construction
Group Rates Available
Corporate Billing Available
OSHA 30 Hour Construction
Industry Outreach Training course is a comprehensive safety
program designed for anyone involved in the construction
industry. Specifically devised for safety directors,
foremen, and field supervisors; the program provides
complete information on OSHA compliance issues. OSHA
recommends Outreach Training Programs as an orientation to
occupational safety and health for workers covered by OSHA
29 CFR 1926. Construction workers must receive additional
training, when required by OSHA standards, on specific
hazards of the job
Learning Outcomes:
* Locate OSHA Standards
references applicable to specific hazardous conditions and
practices (Introduction to OSHA Standards)
* Recognize the aspects of
1926 Subpart C (General Safety and Health Provisions)
* Implement preventative
measures for accidents in their workplace (Subpart D-
Occupational health and Environmental Controls)
* Describe types of personal
protective equipment (PPE), and the requirements for use in
OSHA standards (Subpart E- Personal Protective Equipment)
* Understand the requirements
for fire protection in the workplace (Subpart F- Fire
Protection and Prevention)
* Identify types of rigging
equipment used to protect employees (Subpart H- Rigging;
Subpart N- Cranes and Rigging)
* Identify the critical
health and safety hazards of welding and cutting in the
construction industry (Subpart J- Welding and Cutting)
* Identify common electrical
hazards and related OSHA standards (Subpart K- Electrical
Standards)
* Understand the importance
of scaffolding for workers in elevated workplaces (Subpart
L- Scaffolding)
* Implement measures for
protecting workers and equipment from dangerous falls
(Subpart M- Fall Protection)
* Recognize the hazards
associated with working in or around excavation sites
(Subpart P- Excavations)
* Understand the safety
requirements necessary to protect workers around concrete
and masonry jobs (Subpart Q- Concrete and Masonry)
* Identify the precautions
and hazards to protect workers using explosives or blasting
agents (Subpart T- Demolition)
* Protect workers who perform
jobs on or around stairways or ladders at worksites (Subpart
X - Stairways and Ladders)
* List and describe the
hazards and prevalence of confined spaces
Materials:
You will be
sent a copy of OSHA Standards for Construction. The book
will serve as an invaluable resource for referencing OSHA
standards that have been covered in this course, as well as
researching regulations or standards that could help in
establishing a safer workplace.
Course Pre-Requisite:
None
Testing:
All module quizzes require
a score of 70 to proceed forward in the course. The final
exam also requires a minimum score of 70 to receive a
completion card. The final exam may be taken three
times if necessary.
NEW! OSHA
30-Hour Construction Outreach Study Guide!
This new 190
page Study Guide will ensure you are ready to take the final
exam to receive your OSHA DOL Card. The Study Guide will
assist you throughout the online course and can also be used
as a future reference manual.
Time to
completion:
Once you enroll in the
OSHA 30 Hour Construction Outreach Training course you will
have 6 months to successfully complete the course.
If you do not complete the course in 6 months you will not
receive a completion card.
Proof of Completion?
If you need temporary proof
of completion for your job site, please email the Online
Outreach Trainer at
mike.millsap@360training.com
and he will provide you one.
Passing participants will also receive an OSHA 10-Hour
Construction Outreach DOL course completion card within 4-6
weeks.
In order to receive your
OSHA Outreach DOL course completion card you must complete
the survey at the end of the course.
The OSHA Thirty Hour
Construction Outreach Training course has been reviewed and
accepted by OSHA for online distribution.
Group Rates Available
Corporate Billing Available
Online-OSHA.com
has partnered with 360training.com to bring you up to date
on-line training. All training will be documented and
students will receive a card as proof of valid completion.
For Customer Support call 1-888--360-TRNG. Registered
students may contact the online outreach trainer, Michael
Millsap, with questions at
mike.millsap@360training.com |